STYROFOAM™ ROOFMATE SL-X
Styrofoam™ Roofmate SL-X extruded polystyrene (XPS) thermal insulation distributed by DCTech, is designed for installation above waterproofing membranes in protected membrane roof (PMR) applications. Styrofoam™ Roofmate SL-X XPS rigid insulation boards are unaffected by the conditions encountered on flat roofs including wide fluctuation in operating temperature or repeated freeze/thaw cycles.
Styrofoam™ Roofmate SL-X XPS thermal insulation offers a long term retained R-value, high compressive strength and superior moisture resistance, making Styrofoam™ Roofmate SL-X XPS the perfect solution wherever superior load bearing and high insulating capabilities are specified.
Applications
- IRMA (upside down roof)
- Heavyweight decks with a ballast layer of gravel or concrete slabs
- Timber decking and paving
- Roof gardens
Features
- High compressive strength
- Long term retained R-Values
- Does not support mould growth, will not crumble or decay
Standards
- Green Star Compliant
- Zero ODP
- Low VOC’s
EU Reg EC309394
Download Our Brochure
Specification Clause
General Application Board
Specify Dow Styrofoam™ ‘X’ Foam for Greenstar projects
Dow Styrofoam™ Roofmate-X extruded polystyrene general application board should be described in specifications as follows:
The insulation shall be Dow Styrofoam™ Roofmate-X __mm closed cell rigid cellular extruded polystyrene (XPS) foam panel with minimum compressive strength 300 kPa. Dow Styrofoam™ Roofmate-X is distributed by Dynamic Composite Technologies.
Telephone: 02 8788 9555 Sydney or 03 9369 7920 Melbourne.