Timber framed brick veneer wall, insulated within the frame and protected by vapour permeable, air & water tight ProctorWrap sarking fixed to the outside of the frame. The SmartVap intelligent air barrier membrane installed to the inside of the timber frame.

CLT mass timber wall made water and air tight by the self-adhered vapour permeable ProctorPassive Wraptite SA, externally insulated with a rigid thermoset DCT PIR insulation board and protected by a rainscreen cladding supported by the Nvelope engineered helping hand sub-framing system. As the PIR and CLT are both deemed combustible, this solution is never recommended for type A or B non-combustible wall construction.

Masonry wall made water and airtight by the self-adhered vapour permeable ProctorPassive Wraptite SA, externally insulated with a non-combustible Vulcanwool mineral fibre insulation, protected by a rainscreen cladding supported by the Nvelope engineered helping hand sub-framing system. The insulation is mechanically fixed to the masonry structure with minimal thermal bridging, to form a continuous external insulation layer. As the Vulcanwool insulation is deemed non-combustible, this solution is recommended for type A or B non-combustible wall construction.

Timber framed brick veneer wall, insulated within the frame and protected by a vapour permeable, air & water tight ProctorWrap sarking fixed to the outside of the frame.

Steel frame wall with a with a flexible water and air tight vapour permeable ProctorWrap RS-IT, externally insulated with a non-combustible Vulcanwool stonewool insulation protected by a rainscreen cladding supported by the Nvelope engineered helping hand sub-framing system. The insulation is mechanically fixed to the frame with minimal thermal bridging, to form a continuous external insulation layer. Additional insulation is contained within the frame. As the Vulcanwool insulation is deemed non-combustible per AS1530.1, this solution is recommended for type A or B non-combustible wall construction.

A lightweight clad steel frame wall insulated by non-combustible DCT Vulcanwool and a continuous Vulcanwool high compressive strength thermal break strip fixed between the cladding and the frame to form a drained and vented cavity. The frame and insulation are protected by a vapour permeable, air and water tight ProctorWrap sarking. The SmartVap intelligent air barrier membrane installed to the inside face of the frame must be taped and sealed to form a continuous air and vapour control layer and is best fixed behind a batten to forms a service cavity behind the plasterboard. As the VulcanWool insulation and thermal break strip and both deemed non-combustible, this solution is suitable for type A or B non-combustible wall construction.